5layerCorrugated Machine 3 Layer corrugated cardboard production line is a group of machinery and equipment, which process a roll of paper into five-layer corrugated cardboard through a series of forming processes (warm-up paper, corrugated core paper warm-up, single corrugated cardboard bonding, corrugated cardboard forming, as well as the longitudinal impressing, horizontal cut-off, etc.). The process of corrugated cardboard forming: Paper input from the base support, after warm-up of the pre-heater into the one-sided machine molding, bonding, forming into a single-sided corrugated cardboard. After glue spreading at the second glue machine, the single-sided corrugated board bonds with the warm-up paper, and then enter the double-sided machine drying, cooling, solidifying, and through longitudinal-cutting machine and cross-cutting machine to complete longitudinal cut-off, impressing, cross-cutting of the cardboard, and then qualified corrugated box cardboard can be got. Technical parameters of corrugated cardboard production line 5layer corrugated cardboard production line A. Largest effective paper width 1400-2800 mm. B. Mechanical speed 100-300 m/min. C. The maximum production speed 250 m/min. (three-layer) 200 m/min. (five-layer) D. Use of steam pressure 12 kg/cm². E. Needed steam consumption4,500 kg/hr. F. Needed total power 500 HP. G. The use of starch: corn starch H. Paper standard Paper-125g/ - 180g/.(Water percentage 8-10%), Breaking resistance index (KN./g)3.5, Ring pressure index (N.m/g)8, Core paper -112g/, Ring pressure index (N.m/g)5.5,( Water percentage 8-10%), Core paper -130g/, Ring pressure index (N.m/g)7,( Water percentage 8-10%),